General Care and Maintenance

1. Inspect your AeroBed prior to each use.
2. Keep your AeroBed away from any sharp objects. Large cuts or snags may not be repairable and will not be covered by your guarantee.
3. When not in use, store your AeroBed in a clean, dry place out of extreme temperatures.  Product must be at room temperature prior to inflating.
4. Do not store your AeroBed folded inside sofa beds or roll-aways.  This may cause damage to your bed that will not be covered under your guarantee.
5. In case of incidental damage to your bed, a repair kit has been included.  Please follow repair instructions carefully.

Cleaning

AeroBeds with a flocked surface

• If applicable, we recommend that you do not let the flocked surface of your AeroBed get wet.  Repeated exposure to water or other liquids may cause damage to the flocked surface that will not be covered by your guarantee.  Should liquid come in contact with the flocked surface, blot liquid dry and use a damp cloth to remove any stain.  Let surface air dry completely.

AeroBeds with PVC surface

• You may clean the PVC on your AeroBed with a mild dishwashing detergent or household cleaner.  Do not use strong chemicals or other compounds.  Allow your bed to air dry completely after cleaning and before storing.

AeroBeds with cotton laminate surface

• For spot cleaning, use a clear liquid dish detergent without dye, clean tap water and clean absorbent white cloth.  Wet stained area thoroughly and gently massage stained area with detergent.  Blot the area to remove staining substance, rinse thoroughly and blot dry.  Allow the bed to air dry completely after cleaning and before storing.

Cover/Valance

• The mattress covers and valances' are all machine washable.  Machine wash in warm water with a mild soap or detergent.  Tumble dry on Low Heat.  Remove immediately after drying.

Inflation Difficulties

In the rare event of your AeroBed failing to inflate properly, please use the following as a check list.

If you AeroBed doesn't appear to be inflating:

First, make sure the large air release valve is closed and locked securely.

If the valve is open, close it by using 2 thumbs to push the cover firmly into the valve. Be careful to avoid pushing the valve cover to the right or left as it snaps into the valve opening.

If air leakage from the large air release valve occurs:

Carefully inspect the soft round gasket on the inside of the valve cover.  Make sure there is no dirt or debris, cuts, nicks or tears to the gasket.

If there is dirt or debris; clean and use.  If cut, nicked or torn, order a replacement part by going to the spare parts  section of the web site.

If you are still having inflation problems then please contact us via the contact us section of the web site for further help.